Shipping throughout Russia and to other countries

Car accessories SAMSON TBLk, TBst, TBk, Lro-1, etc.

Tow ropes made of TBLk textile tape are an alternative to rope cables. Due to the qualities of the flat belt, the cables have a smaller mass and more compact dimensions for transportation. Polyester is highly resistant to acids, oils, solvents and has low water absorption, so it retains consumer qualities in difficult environmental conditions.

Tow ropes made of steel rope TBst are made of steel rope according to GOST 2688-80, as well as according to GOST 7668-80 for cables with a pulling force of more than 10 tons. The body of the cable is a six-row double-twisted rope, the main consumer qualities of which are high strength and wear resistance.

Tow ropes made of synthetic rope TBk are six-row ropes made of high-strength material based on polyolefins, the main consumer qualities of which are high strength and wear resistance. Ropes are resistant to the aggressive effects of acids, alkalis and solvents, as well as to the effects of ultraviolet radiation without loss of consumer qualities. The distinctive features of the ropes are water resistance and buoyancy, the ropes do not absorb moisture and, due to their low weight, stay on the water.

Manual lever winches

The LRo-1 series winches are designed for lifting and lowering loads during installation, dismantling and repair work in industry, construction, transport, and everyday life.

QSS series winches are designed for pulling loads, pulling cars and other vehicles, as well as for pulling wires or ropes.

Electric car winches are most often used by fans of off-road driving, athletes and travelers to pull the car out of impassable places, as well as in cases where it is impossible to move it at the expense of its own engine.

Mounting and traction mechanisms

Mounting and traction mechanisms of the MTTMp series are designed for pulling and lifting loads over long distances using a steel rope, as well as for slinging.

Mounting and traction mechanisms of the MTM 30 series are designed for manual lifting, lowering and dragging of individual loads in any direction at the workplace. The main parts of MTM are made of steel, cast iron, brake pads made of brass. The construction does not use flammable and accumulating static charge materials.

The HSS series mounting and traction mechanisms are designed to move cargo in horizontal and inclined surfaces. It is widely used in the mining industry, in manufacturing enterprises. Important features of the HSS series mechanism are reliability in use, light weight and size.

Mounting and traction mechanisms of the JM series are a portable manual lifting and traction mechanism designed to perform lifting and traction work, as well as for lowering loads, tensioning and dismounting. Due to its small size, it is ideal for use in conditions of limited space.

Automotive winch reinforcement units are designed to increase the traction force of manual and electric winches, if the nominal force is not enough to perform a particular operation. The unit is suitable for working with both steel and synthetic ropes.

Jacks

Screw jacks belong to a group of the simplest mechanisms used to lift various loads to a level usually not exceeding 1 meter. Screw jacks are simple in design and reliable in operation, the jack has compact dimensions, low own weight and easily fits in the trunk of a car.

Hydraulic jacks are used for lifting loads during installation, construction and car repair work. Bottle-type hydraulic jacks are the most common.

Rack-and-pinion jacks have found their application mainly in trucks. The main working elements of a rack-and-pinion jack are a vertical rail with teeth or holes and a pick-up. The pick-up is moved in a vertical plane by means of a swinging lever or a rotating gear, in this case the lever is replaced by a rotation handle.

Price list

Catalog

All SAMSON products

The group «New Technologies» offers products from the plant SAMSON: textile slings, ribbon, round-row, chain, rope, with equalizing blocks, soft mounting towels, grips
  • Slings SAMSON
    Slings
    STP, STK, 1ST, 2ND, 4TH, etc.
  • Traverses SAMSON
    Traverses
    Linear, frame, etc.
  • Tali SAMSON
    Tali
    TRSR, TRSHSR, HSHZ, etc.
  • Car accessories SAMSON
    Car accessories
    TBLk, TBst, TBk, Lro-1, etc.
  • Jacks SAMSON
    Jacks
    Screw, rack and pinion, etc.
  • Accessories SAMSON
    Accessories
    LK-R, LK-RO, LK-O, TK, etc.
  • Mounting systems SAMSON
    Mounting systems
    Ratchets, belts, lanyards, etc.
  • KGP Kits SAMSON
    KGP Kits
    For concrete rings, etc.
  • Cranes SAMSON
    Cranes
    Bridge, cantilever, etc.
  • Blocks SAMSON
    Blocks
    Closed, open, etc.
  • Winches SAMSON
    Winches
    LET, LM, LMm, LMCH, TL, etc.

About SAMSON

SAMSON (Orel) has been specializing in the manufacture of high-quality and reliable lifting equipment since 2001: slings, traverses, grips, shrouds, mounting blocks and much more.

  • reliability

    All mechanisms are manufactured in strict accordance with GOST, RD, TU. The company has all the necessary certificates of conformity.

  • control

    SAMSON has its own production workshops and warehouses, direct channels for the supply of components from Russia and foreign countries.

  • confidence

    The company's manufactured goods successfully pass not only mandatory, but also additional quality checks at the customer's request.

Information Board SAMSON

Learn more about our products SAMSON.
  • Price list for SAMSON equipment поставщика САМСОН
    Price list for SAMSON equipment
  • SAMSON equipment catalog из каталога САМСОН
    SAMSON equipment catalog
  • SAMSON product Catalog производства САМСОН
    SAMSON product Catalog
  • Questionnaire for a suspended traverse. поставщика САМСОН
    Questionnaire for a suspended traverse.
  • A questionnaire for a spatial traverse with a suspension for the center. завода САМСОН
    A questionnaire for a spatial traverse with a suspension for the center.
  • Questionnaire for the H-shaped traverse. изготовителя САМСОН
    Questionnaire for the H-shaped traverse.
  • Questionnaire for the frame traverse. бренда САМСОН
    Questionnaire for the frame traverse.
  • Questionnaire for the bridge support crane. поставщика САМСОН
    Questionnaire for the bridge support crane.
  • Questionnaire for overhead overhead crane. завода САМСОН
    Questionnaire for overhead overhead crane.
  • Questionnaire for the cantilever crane. в магазине САМСОН
    Questionnaire for the cantilever crane.
  • Questionnaire for cable-stayed traction. поставщика САМСОН
    Questionnaire for cable-stayed traction.

NEW TECHNOLOGIES GROUP

For sales and support please contact
Send your question now: